Everyone knows lint collects in a clothes dryer, but few realize that it also collects in washing machines. Dirt and moisture accumulate along with lint, causing washing machine mold and mildew that results in a stinky washer. You can avoid this problem by cleaning the lint traps of your washing machine regularly, which will keep mold and mildew from forming and then spreading throughout your home. This post looks at cleaning these lint traps to remedy or prevent a stinky washer.
Just as it does in a dryer, lint builds up in a washer as laundry tumbles. The soap in laundry detergent mixes with the dirt and tumbling action of a wash cycle, which causes lint to form. While a great deal of the dirt and lint rinses out of the tub and down the drain at the end of a wash cycle, some lint splashes above the splash line, sticking to the sides of the tub and attaching to the upper rim of a washer. Lint can also trap in small crevices and on the agitator of the washtub.
The collected lint contains dirt and moisture that cause washing machine mold and mildew, leading to a stinky washer. If you clean away the lint, you can avoid the formation of washing machine mold and mildew that will not only contaminate everything you wash, but also spread to other parts of your home.
Open your washer and look for lint on the plastic agitator, along the drain hose, and along the top and rim of your machine. Wipe the areas down with a clean, damp cloth, making sure to grab as much lint as possible. Remove the agitator tube from the washer, looking for lint or washing machine mold and mildew along the agitator and filter. Use a damp paper towel or sponge to remove lint attached to the tube while you still have the agitator removed. Peel away any lint on the filter in the agitator tube.
Check the interior rim of your stinky washer for lint. Feel around the rim of the tub, pulling out the lint trap and removing any accumulated lint. Use a damp paper towel or sponge to wipe down the rim to ensure you remove any washing machine mold and mildew. Grab any pieces of lint falling lose when removing the lint trap.
Inspect the drainage hose on your stinky washer for lint. Rinse the drainage hose lint trap with warm water and dry thoroughly before replacing. After cleaning all of the lint traps, double check for any remaining lint and wipe down the interior of the washtub one more time.
By taking the time to clean the filters and lint traps of your washer regularly you will be able to get rid of stinky washer once and for all.